Specification:
Model: 90-5050-SMD
Input Voltage: 12V
Lighting Color: White/ Blue
Net Weight: 420g/14.82oz
One Piece LED Strip Length: 60″
Housing: IP67 Waterproof
Running Life: 30,000 hrs
2-Way Splitter Cable Long: 144inch (3.6m)
Materials: LED Chip+Silicone

Usage:
RV Awning Lights, Truck Bed Light Kit, Truck/Cargo Bed Lighting Light Kit, Running Board Led Light Kit, Step Bar Led Light Kit, Side Door Led Light kit, Side Mounted Led Light kit, Pickup bed Light Kit; can mounted to the rear window,party household decoration and so on ,as long as the length is suitable for you.

Can i cut the led strip to size?
Yes, you can cut the led strip for your need.But it will not waterproof after then.It is better not to cut it.Thank you.

How are they powered? Do they have batteries or need to be plugged into anything?
You’ll need to wire them to a 12 volt power source. Whether it be directly to the battery or tapping into your fuse block or existing wiring,
you’ll have to do it that way. There is plenty of wiring to the lights themselves, but you’re limited for the switch and relay circuitry. Make sure you have some spare wire for the install

Package List:
2 x Truck Bed Light Strips
1 x 2-Way Splitter Cable
1 x On-Off Switch
1 x Set Ties

Product Features

  • The TWO 6 feet of power wire combined with the 5 feet ultra bright LED’s allow you to work comfortably without having the trouble of holding a flashlight or having to plug in a portable light. It can illuminate the entire bed of your truck.
  • IP67 rated waterproof, snowproof, dustproof and sandproof, silicone protects LED strip. This Truck Bed Led Lighting strip is 100% water proof. You don’t need to worry about working out there even when itfs raining. You can even install it at someplace that typically gets wet.
  • Each pod is effortlessly mounted under your bedrails using either the included tape or screws. With only a 5 of an inch width the pods can be extremely easily hidden. The 6 feet long wire also provides convenience during the installation proces.
  • The reliable 3M adhesive can be simply peeled to stick on any smooth surface in seconds, plus, the extra ties help to keep your wires in order. With only a 5 of an inch width the pods can be extremely easily hidden. The 6 feet long wire also provides convenience during the installation proces.
  • You can not only use this lighting kit on your truck, but also install on your boat, side door, unloading vehicle, under the kitchen cabinet or anywhere at home you think it can work best, as long as the length is suitable for you.

Click Here For More Information