THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

    2006-2010 Jeep Commander
    2007-2015 Jeep Wrangler
    1999-2010 Jeep Grand Cherokee

ADDITIONAL INFORMATION

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional

It’s Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

Product Features

  • Vehicle Bolt Pattern: 5×5 (5×127)
  • Wheel Bolt Pattern: 5×5 (5×127)
  • Hub Bore: 71.5mm
  • Thread Pitch: 1/2″x 20
  • Thickness: Each Spacer Measures 1.50″ Thick

Click Here For More Information